Home > GENERAL MOTORS > Differential Covers >   GM 9½" Ring Gear, 14 Bolt Differential Cover With Oil Fill/Level Check Hole
	Our Price: $195.00 Product Code: 10303-2 Finish Click to view another Finish As-Cast Finish Black Powder Coat [Add $45.00] Polished [Add $110.00]

Description   This diff cover fits the rear end on the GM Corporation 9½" 14 bolt differentials used on Hummer H2 and many Chevy and GMC trucks, vans and SUVs. This cover is very similar to PML part number 9504 and it fits all the vehicles that can use part number 9504. This cover can also work on 2007 and newer GM and Chevrolet trucks and vans and Hummer H2. The difference between the two PML 9½ GM rear end covers is that part number 9504 does not have a hole for level check/oil fill and it has 1 quart over stock capacity. Part number 10303-2 does have a hole for level check/oil fill and has ½ quart over stock capacity. Also, part number 10303-2 has a boss that can optionally be machined for a temperature sensor. Typical applications for this cover include the following. Be aware that for each model and year there may be more than one rear axle possible. See also GM 10 bolt 8½ and 14 bolt 10½.  ½ Ton Trucks, 1988 to Current: C10 & K10 C1500 & K1500 Silverado 1500 & Sierra 1500 Silverado 1500HD & Sierra 1500HD ¾ Ton Trucks, 1979 to Current: C20 & K20 C2500 & K2500 Silverado 2500 & Sierra 2500 ¾ Ton Vans, 1981 to Current: Vandura Express Savana G2500 1 Ton Vans, 1982 to 1995: Vandura Savana G3500 Hummer H2 Avalanche Trailblazer SS Suburban 2500, 1980-Current Chevrolet SSR (6 speed) Note: GM has used four different bolts on these differentials so to complete your order, we need to know which bolts you have. These differentials have used both metric and standard cover bolts. The bolt length has not been consistent either. When ordering one of these covers, you will need to pull one of your stock bolts out (a top bolt is best) and measure the length and determine whether it is metric or standard. Bolt length is measured from the underside of the head (where a washer would sit) to the tip. Metric bolts will have 20 threads per inch, standard ones will have 18. Also, a bolt head with lines or letters on it is typically standard. A bolt with numbers such as 5.8, 9.8, 10.9, or 12.9 is likely to be metric. Please note the length of your stock bolts, and whether they are standard or metric in the vehicle information section when placing your order so we can provide the correct bolts. We know this is a hassle, but we do not want to send the wrong bolts or charge everyone a lot of extra money to cover sending all possible bolts with each cover. Volume:  0.5 qt. over stock

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: GENERAL MOTORS > Differential Covers GENERAL MOTORS

	Ford Sterling 10¼" or 10½" Ring Gear, 12 Bolt Differential Covers $195.00
	GM 700R4, 4L60, 4L60E, 4L65E Low Profile Transmission Pan $190.00
	GM 4L80E, 4L85E Early Deep Transmission Pan $240.00
	Corvette 4L60E Deep Transmission Pan $215.00
	GM 7½" and 7 5/8" Ring Gear, 10 Bolt Differential Cover $165.00
	GM Turbo 400 Low Profile Transmission Pan $185.00
	AAM 9¼" Ring Gear 14 Bolt Differential Cover For Dodge Ram 2500 & 3500 $195.00
	GM 4T60E, 4T65E Low Profile $215.00
	GM Turbo 350 Low Profile Transmission Pan $185.00