10 Bolt Differential Cover

Home > GENERAL MOTORS > Differential Covers >

GM 7½" and 7 5/8" Ring Gear, 10 Bolt Differential Cover

Our Price: $165.00

Availability: Usually Ships in 24 to 72 Hours
Product Code: 9401

Finish

Click to view another Finish

Description

This diff cover fits GM vehicles with 7 1/2" (7.5") or 7 5/8" (7.625") ring gear 10 bolt differential. Typical applications include the following. Be aware that for each model and year there maybe more than one rear axle possible. See also GM 10 bolt 8½.

Chevy S10, 1983 to 2004
Chevy S10 Blazer, 1983 to 2004
GMC S15, 1983 to1994
GMC Sonoma, 1991 to 2004
GMC Jimmy, 1984 to 2004
Chevy Astro Van, 1982 to Current
GMC Safari Van, 1982 to Current
Camaro, 1993 to 2002
Firebird, 1993 to 2002

Note: GM has used four different bolts on these differentials so to complete your order, we need to know which bolts you have. These differentials have used both metric and standard cover bolts. The bolt length has not been consistent either. When ordering one of these covers, you will need to pull one of your stock bolts out (a top bolt is best) and measure the length and determine whether it is metric or standard. (Yes, this is a pain. However, the bolts and drain plugs are stainless steel and expensive. We do not want our customers to pay extra for several different sizes with each cover.) Here are some guidelines:

Bolt length is measured from the underside of the head (where a washer would sit) to the tip.
Metric bolts will have 20 threads per inch, standard ones will have 18. Also, a bolt head with lines or letters on it is typically standard. A bolt with numbers such as 5.8, 9.8, 10.9, or 12.9 is likely to be metric.
If you order on-line, please note the length of your stock bolts, and whether they are standard or metric in the vehicle information section when placing your order so we can provide the correct bolts.

This cover features fill/level check and drain holes for easier maintenance. It also has an undrilled boss for a temperature sensor. The option to have boss drilled and tapped will need to be ordered over the phone, not on-line.

This cover can be machined for a temperature sensor. The sensor will be located on the face of the cover and will point toward the rear of the vehicle. See image (click here) for an example. Please call to order if you would like a cover with a temperature sensor location.

Volume: 0.5 qt. over stock

Click here for dimensions. A separate window will open with the dimensions.

For a larger picture, please click one of the above images.

PML Differential Cover Features:
Increased oil capacity for cooler temperatures
Sand-cast aluminum with raised fins
3/16-inch thick wall construction to add strength to differential housing
3/8-inch thick gasket flange will not bend when bolts are tightened
Machined gasket surface for a secure seal using RTV or factory reusable gasket
Oil changes without removing the cover
All hardware provided, including magnetic drain plug

Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item:

GENERAL MOTORS > Differential Covers
GENERAL MOTORS

	GM Turbo 400 Low Profile Transmission Pan $185.00
	AAM 9¼" Ring Gear 14 Bolt Differential Cover For Dodge Ram 2500 & 3500 $195.00
	GM 4T60E, 4T65E Low Profile $215.00
	GM Turbo 350 Low Profile Transmission Pan $185.00
	Small Block Chevy™, 1987-1998, Center Bolt CHEVROLET® Script and Fins $220.00
	Nissan Rear Differential Cover $195.00
	Chrysler/Dodge 8¼" Ring Gear, 10 Bolt Differential Cover $195.00
	GM Torsen 10 Bolt Rear $170.00
	Dodge 727 (36RH, 37RH), 518 (46RH, 46RE), 618 (47RH 47RE), 48RE Deep Transmission Pan $220.00